UNSW Making

Sheet Metal Fabrication Fundamentals Badge

Entry Level induction to Metal Working

Sheet Metal Fabrication Fundamentals Badge image

Learn practical sheet metal fabrication skills in this 2 hour group badge training session during which you will make a sheet metal dust pan. This badge training session is assessed and if you are deemed competent you will receive your Sheet Metal Fabrication Fundamentals Badge. 

Machine Access

Once you have learnt this badge you will be granted access to the following machines:

  • Bead Roller
  • Bench Press
  • Bender
  • Drill Press
  • English Wheel
  • Guillotine
  • Hydraulic Press
  • Metal Bandsaw
  • Panbrake
  • Sandblaster
  • Sheet Metal Roller
  • Shrinker Stretchers
  • Spot Welder
Online Components
Safe Work Procedure (SWP)

Please read the Safe Work Procedures document at the link below. You will be asked to enter your zID and zPass to access the document. Click the "Declare As Read" button on the SafeSys website (Warning website for Safesys is very slow), then check the declaration below on this page and press Submit.

Click here to Read
Practical Component
Badge Training

Learn practical sheet metal fabrication skills in this 2 hour group badge training session. This badge training session is assessed and if you are deemed competent you will receive your Sheet Metal Fabrication Fundamentals Badge.

Important information:

  1. Closed shoes must be worn and long hair must be tied back
  2. Please arrive 10 minutes before the session start time, if you arrive late you will be asked to come back at another session. 
  3. Our Makerspace Safety Induction is highly sought after and very limited. If you can not make the class, please make sure to cancel your registration so others can take your place. 

 

 

Book Training