UNSW Canberra Makerspace

Formlabs Form 4L Resin 3D Printer

Formlabs Form 4L

Formlabs Form 4L

Formlabs Form 4L Resin 3D Printer

The Formlabs Form 4L is a large‑format, high‑resolution resin 3D printer designed for producing detailed, professional‑quality parts at scale. Using advanced resin printing technology, it delivers smooth surface finishes, fine detail, and excellent dimensional accuracy, even on large or complex components.

With its expanded build volume, the Form 4L is well suited to large prototypes, low‑volume production runs, tooling, moulds, enclosures, and research applications where filament‑based printers are not sufficient. A wide range of engineering and specialty resins enables parts to be tailored for strength, flexibility, heat resistance, or visual quality, depending on project requirements.

No Badge Required

Location: ProtoLAB

Formlabs Form 4L
(TSG‑Assisted Service)

Important: Resin Use & Operation

The Formlabs Form 4L uses specialised, high‑cost resins. For this reason, all resin use is charged at cost or must be supplied (You must discuss with TSG Staff before purchase), based on the amount of material consumed during printing.

Due to the expense of the resin and the technical handling and post‑processing required, all Form 4L prints are set up, run, and processed by TSG technical staff only. Users are not permitted to load resin, start prints, or carry out post‑processing themselves.

This approach ensures:

  • Safe handling of liquid resins
  • Accurate material tracking and cost recovery
  • Consistent, high‑quality results

To use the Form 4L, please submit your design and project requirements for staff assessment and printing support via a TSG Task Request (link below) with your prepared design files and print requirements. TSG staff will review the request and carry out the print on your behalf.

This service is suitable for coursework, prototypes, and general 3D printing where staff‑assisted operation is required.

Typical Applications

  • Large, high‑detail prototypes
  • Low‑volume production runs
  • Moulds, tooling, and fixtures
  • Enclosures and presentation models
  • Research and advanced academic projects

Quantity: 1

TSG Task Request

Specifications

Print Technology

  • Masked Stereolithography (MSLA)

Build Volume

  • 353 × 196 × 350 mm (W × D × H)
  • Approx. 24 litres total build volume
  • Suitable for large parts or high‑throughput batch printing

Resolution

  • XY resolution: ~46 microns
  • Layer thickness (Z): 25–200 microns
  • Produces smooth surfaces and fine detail across large parts

Print Speed

  • Maximum print speed: up to 80 mm/hour
  • Most prints complete in under 6 hours, depending on part height and material
  • Speed is largely independent of part count (whole layers cured at once)

Materials

  • Supports 23+ Formlabs proprietary resins, including:
    • Standard & Clear resins
    • Tough, Durable, and Rigid Engineering resins
    • Flexible & Elastic resins
    • High Temp and Specialty resins

Resin System

  • Large‑format Flexible Film Resin Tank
  • Automated resin dispensing with 5L resin pumping system
  • Built for long service life and reduced peel forces

Accuracy & Tolerances

  • Typical dimensional accuracy: ±0.15% in XY
  • Suitable for assemblies, jigs, fixtures, and functional prototypes

Software & File Support

  • PreForm software (free, Formlabs)
  • File formats: STL, OBJ, 3MF
  • Compatible with Windows and macOS

Post‑Processing (Required)

  • Parts require washing and UV curing
  • Compatible with Form Wash L and Form Cure L systems
  • Post‑processing handled by technical staff in makerspace environments

Safety Information

Risk Management Form | Safe Work Procedure