Like traditional filament (FFF) 3D printing, Masked Stereolithography Apparatus or MSLA printers build up a 3D model via a series of layers, but that is where the similarities end.
Instead of depositing molten plastic, ultraviolet light is projected through an LCD mask and into a vat of resin. This resin hardens into a 2 dimensional profile, which is then peeled from the bottom of the vat and reset for the next layer.
MSLA 3D printers are, compared to standard 3D printing:
Location: ProtoLAB
Before using the Resin printer, you must have completed both the Makerspace Induction to the ProtoLAB and the Resin Printing Induction.
The Resin Printing Induction covers safe operation, material handling, and booking requirements. Once inducted, you will be able to book resin printing sessions through the Makerspace booking system.
All required inductions must be completed prior to your first print.
Manufacturer: Prusa Research
Model:
Prusa SL1S SPEED (2 machines)
Prusa CW1S (2 machines)
Build Volume: 127 x 80 x 150 mm
Minimum Layer Height: 0.025mm
Supported Materials: UV sensitive liquid resin (405nm)*
*New resins must be approved first by staff.
To book time on the Resin printer, you must first complete an induction for this equipment.
Before booking the equipment, ensure your design has been fully sliced and that you know the estimated print time. Book the appropriate number of sessions based on this estimate.
Quantity: 2