UNSW Making

Multicam CNC Monitor Badge

This badge allows you to monitor your projects running on the Multicam CNC

Multicam CNC Monitor Badge image

By completing this badge you will gain access to facilities containing Multicam CNC equipment and will be granted the ability to monitor your projects as they run on the Multicam CNC in conjunction with a CNC Operator. This badge is required for a student to complete any projects on the Multicam CNC and covers the basics of safe access of the space, the startup, preflight and cleanup procedures which will be executed by/with the Operator and is the responsibility of the monitor to ensure take place. 

Machine Access

Once you have learnt this badge you will be granted access to the following machines:

  • CNC Routers - Flat bed
Online Modules
Safe Work Procedure (SWP)

Please read the Safe Work Procedures document at the link below. You may be asked to enter your zID and zPass to access the document. Instructions for use are in the tab 'SWP Steps'. Then check the declaration below on this page and press 'Submit'.

Click here to Read
CNC Learn Module

Read through the information in the CNC Basics Learn Module. You will be asked questions on the information during the induction so make sure you pay attention.

Click here to Read
Practical Modules
Badge Training

Please enroll in one of the availible occurances of this training module.

Occurances with less than 2 bookings will be canceled.

If you are a non Built Environment student or staff member, and your having a problem getting a booking, contact Richard (r.blackwell@unsw.edu.au ) to be manually enrolled in one of thier exclusive sessions.

Inductions can be sceduled for groups 3 or more students at alternate times by contact Richard (r.blackwell@unsw.edu.au )

Book Training