This reading module requires users to review and acknowledge the Risk Management Form (RMF) for the manual metal lathe prior to completing the SWP and attending the face-to-face practical induction.

Users must complete this RMF module before completing the Metal Lathe SWP module. The RMF outlines:

• key hazards associated with manual metal lathe operation

• required control measures

• PPE requirements

• emergency procedures

• training and supervision expectations

Completion confirms that the user has:

• read the RMF

• understood the key risks associated with the equipment

• reviewed the safety controls required before progressing to the next stage of the badge

This reading module requires users to review and acknowledge the Safe Work Procedure (SWP) for the manual metal lathe prior to attending the face-to-face practical induction.

Users must complete this SWP module after completing the Metal Lathe RMF module. The SWP outlines:

• mandatory safety requirements

• required PPE

• pre-start checks

• safe operating procedures

• emergency stop and shutdown steps

• clean-up and housekeeping expectations

Completion confirms that the user has:

• read the SWP

• understood the required safe operating steps

• reviewed the rules and expectations for manual metal lathe use before attending practical training

This module is the face-to-face practical induction required to complete the Metal Lathe Fundamentals and Safety Badge.

The session is delivered by approved technical staff and provides supervised training covering:

• identification of lathe components and controls

• safe machine setup and pre-operation checks

• correct workholding and tool setup

• basic machining operations

• swarf management and hazard awareness

• emergency stop and shutdown procedures

• safe cleaning and housekeeping after use

Users must demonstrate safe behaviour and basic operational competency before the module can be completed.