UNSW Making

MIG / TIG Welding Badge

Individual Training on the Mig and TIG Welding Machines

MIG / TIG Welding Badge image

Learn safety procedures and practical skills on the Mig Welder. This badge training session is assessed and if you are deemed competent you will receive your Mig / TIG Welder Badge.

Machine Access

Once you have learnt this badge you will be granted access to the following machines:

  • Bench / Pedestal Grinder
  • Cold Saw
  • Welders (MIG, TIG, Arc & Oxy)
  • Welding Table
Online Modules
Safe Work Procedure (SWP) MIG/TIG Welding

Please read the Safe Work Procedures document at the link below. You may be asked to enter your zID and zPass to access the document. Instructions for use are in the tab 'SWP Steps'. Then check the declaration below on this page and press 'Submit'.

Click here to Read
Safe Work Procedure (SWP) Bench Grinder/Linisher

Please read the Safe Work Procedures document at the link below. You may be asked to enter your zID and zPass to access the document. Instructions for use are in the tab 'SWP Steps'. Then check the declaration below on this page and press 'Submit'.

Click here to Read
Safe Work Procedure (SWP) Cold Saw

Please read the Safe Work Procedures document at the link below. You may be asked to enter your zID and zPass to access the document. Instructions for use are in the tab 'SWP Steps'. Then check the declaration below on this page and press 'Submit'.

Click here to Read
Online Pre Reading and Video

Read through the information and watch the videos in the Welding Learn Module. You will be asked questions on the information during the induction so make sure you pay attention.

Click here to Read
Practical Modules
Badge Training (Individual)

Generally this machine does not have scheduled Badge Training sessions. Instead please complete the above online learning components and then speak with Makerspace Staff in person to arrange some Badge Training on this machine. 

Please note that due to the complex nature of this machine in most cases multiple training session will be required to become competent on this machine. After attending the Badge Training session Makerspace staff will keep track of user progress via a training log.  Once a user has been deemed competent on the machine they will receive the associated Badge. 

Book Training
Training Log

Makerspace staff will keep track of user progress on this machine via a training log.  Once a user has been deemed competent on the machine they will receive the associated Badge.

Training Log

No entries logged