MTS Dynamic Actuator Badge
Certification for users trained to safely operate the MTS 25 kN Dynamic Load Frame under supervision in TestLAB.
The MTS Dynamic Actuator Badge certifies that the holder has completed the required safety documentation and supervised competency training for operating the MTS 25 kN Dynamic Load Frame in TestLAB at UNSW Canberra ADFA Campus.
To obtain this badge, users must:
- Prerequisites
- Hold the TestLAB Safety Badge.
- Read and acknowledge the Safe Work Procedure (SWP) for the MTS Dynamic Load Frame.
- Read and acknowledge the Risk Management Form (RMF) for Dynamic Load Frame testing.
- Complete the MTS Dynamic Triaxial competency training with an authorised TestLAB Technical Support Group (TSG) trainer.
Note: Check the availability of TSG staff before attending any in-person training session.
The badge will only be issued once TSG staff confirm that the user has demonstrated safe and competent operation of the MTS Dynamic Load Frame. Additional supervised training may be required if competency has not yet been demonstrated.
Read the Safe Work Procedure (SWP) before undertaking MTS Dynamic Actuator training or operation. The SWP outlines the required PPE, safety checks and procedures for safe operation of the MTS 25 kN testing system.
By completing this module, you confirm that you have read and understood the SWP.
Click here to completeAfter completing the MTS Dynamic Actuator Safe Work Procedure (SWP) Reading Module, read the Risk Management Form (RMF). The RMF outlines the hazards, risks and control measures associated with operating the MTS 25 kN Dynamic Load Frame.
By completing this module, you confirm that you have read and understood the RMF.
Click here to completeThis module is used to record supervised training sessions completed on the MTS 25 kN Dynamic Load Frame in TestLAB at UNSW Canberra.
To be eligible for the MTS Dynamic Actuator Badge, users must complete the required MTS Dynamic Triaxial competency training with an authorised TestLAB Technical Support Group (TSG) trainer.
Before attending any training session, users must check the availability of TSG staff to ensure supervision is available and the session can be recorded.
This training log module does not automatically grant the badge. The badge will only be issued once TSG staff confirm that the user has demonstrated safe and competent operation of the MTS Dynamic Load Frame. Additional supervised training sessions may be required if competency has not yet been demonstrated.
Training Log
No entries logged