Textiles Digital Print Lab
The Textiles Digital Print Studio Badge covers Health and Safety relating to and effective use of the Textiles Digtital Print Lab (staff only).
The Textiles Digital Print Studio Badge (staff only) will teach participants Health and Safety relating to, and effective use of the dye sublimation printers and direct-to-garment printer. Participants can obtain the Textiles Heat Press Badge alongside this badge, if not held already.
Participants will learn how to prepare a digital file for print, how to prepare various fabric substrates for print, how to print on various fabric substrates, and how to set inks using the heat press.
Participants are required to wear enclosed footwear and tie back long hair.
Please read the Safe Work Procedures document at the link below. You may be asked to enter your zID and zPass to access the document. Instructions for use are in the tab 'SWP Steps'. Then check the declaration below on this page and press 'Submit'.
Click here to ReadTo book an induction time, if none are available, see staff in Textiles Studio in room F102 or email artdesigntextiles@unsw.edu.au
Book Training