Triaxial Test Badge
Certification for users trained to safely operate the Wykeham Farrance Triaxial Station under supervision in TestLAB.
The Triaxial Test Badge certifies that the holder has completed the required safety documentation and supervised training for operating the Triaxial Testing System in TestLAB at UNSW Canberra ADFA Campus, Building 20, Room 110.
To obtain this badge, users must:
- Prerequisites
- Hold the TestLAB Safety Badge.
- Read and acknowledge the Safe Work Procedure (SWP) for the Triaxial Station.
- Read and acknowledge the Risk Management Form (RMF) for the Triaxial Station.
- Complete supervised competency training with TestLAB Technical Support Group (TSG) staff.
Note: Check the availability of TSG staff before attending any in-person training session.
The badge will only be issued once TSG staff confirm that the user has demonstrated safe and competent operation of the Triaxial Testing System. Additional supervised training may be required if competency has not yet been demonstrated.
Read the Safe Work Procedure (SWP) before undertaking Triaxial Test training or operation. The SWP outlines the required PPE, pre-operational checks, specimen setup and procedures for safe operation of the Triaxial Station.
By completing this module, you confirm that you have read and understood the SWP.
Click here to ReadAfter completing the Triaxial Test Safe Work Procedure (SWP) Reading Module, read the Risk Management Form (RMF). The RMF outlines the hazards, risks and control measures associated with operating the Triaxial Testing System.
By completing this module, you confirm that you have read and understood the RMF.
Click here to ReadThis module is used to record supervised training sessions completed on the Triaxial Station in TestLAB at UNSW Canberra.
To be eligible for the Triaxial Test Badge, users must complete supervised competency training with TestLAB Technical Support Group (TSG) staff.
Before attending any training session, users must check the availability of TSG staff to ensure supervision is available and the session can be recorded.
This training log module does not automatically grant the badge. The badge will only be issued once TSG staff confirm that the user has demonstrated safe and competent operation of the Triaxial Testing System. Additional supervised training sessions may be required if competency has not yet been demonstrated.
Training Log
No entries logged