Most of our prints are run on Bambu FDM printers, and are priced per gram of material used.
If you'd like a better idea of how much your prints could cost before sending your request check out our guide to Bambu's slicing software here!
3D Printing is FREE if you are printing for your Engineering Course or Engineering Thesis, when printing objects up to 235 x 235 x 235 mm with PLA or PETG. Simply provide either the course code or your supervisor upon submission!
Regular plastic filament printing with commonly requested materials.
Different colours are periodically available - check the submission form for current stock!
| Filament | Price |
|---|---|
| PLA (90% Recycled) | $0.10/g |
| PETG (90% Recycled) | $0.10/g |
| ASA | $0.12/g |
| TPU-68D | $0.13/g |
These are materials that we stock in low volumes or require special setups to work with.
We cannot always guarantee their availability, and they will have a longer lead time.
| Filament | Price |
|---|---|
| ABS | $0.16/g |
| Nylon (PA6) | $0.18/g |
| TPU-95A | $0.18/g |
| Polycarbonate (PC) | $0.20/g |
| Polypropylene | $0.29/g |
| Nylon-CF | $0.31/g |
| PPS-CF | $0.47/g |
| PPA-CF | $0.52/g |
#Exclusive to Engineering#
We also sell 1kg refills for students with the DIY 3D Printing Badge to run their own prints.
All filament is 1.75mm and will fit into most printers everywhere. Refills must be loaded onto a reusable spool to use.
| Spool | Price |
|---|---|
| Reusable Spool | $12 |
| Filament | Price |
|---|---|
| PLA (90% Recycled) | $35/kg |
| PETG (90% Recycled) | $35/kg |
| ASA | $50/kg |
| TPU-68D (with spool) | $60/kg |
Prices per part will be estimated using Formlabs proprietary slicing software PreForm.
| Resin | Price |
|---|---|
| Clear | $0.50/ml |
| White | $0.50/ml |
| Grey Pro | $0.61/ml |
| Biomed Clear | $1.01/ml |
Prices per part will be estimated using FormLabs proprietary slicing software PreForm.
| Powder | Price |
|---|---|
| Nylon (PA-12) | $0.20/g |
Thermoplastic printing with fiber reinforcement. Prices per part will be estimated using the Markforged proprietary slicing software Eiger.
| Base Material | Price |
|---|---|
| Onyx (Nylon-CF) | $0.42/g |
| Reinforcement Material | Price |
|---|---|
| Fibreglass | $1.95/g |
| Kevlar | $3.40/g |
| Carbon Fibre | $3.99/g |
Prices per part will be estimated using Simplify 3D slicing software.
Material
Printing Time
